ALBILEX^®-AKTIV-des

The disinfectant ALBILEX^®-AKTIV-des is based on a mixture of hydrogen peroxide (<50 %), silver ions (~500 ppm) and peracetic acid (<5 %). ALBILEX^®-AKTIV-des is specially designed for very severe microbiological contamination cases and is used for the disinfection of drinking-water piping systems, storage tanks and wells.

Characteristics

• Strong algicidal, bactericidal and fungicidal effects
• Strong effect against biofilms and pseudomonas aeruginosa
• One disinfectant for all kinds of pipe materials
• Simple to use and easy to dose in all common dosing-kits
• Long shelf-life (up to two years) due to decomposition and corrosion inhibitors
• Easy inactivation and disposal

Application

Use in piping systems: ALBILEX^®-AKTIV-des is directly injected to the water when filling the pipe section to be disinfected by means of a dosing-kit. The filling process under addition of ALBILEX^®-AKTIV-des is to be continued until the measured hydrogen peroxide concentration is up to 500 ppm at the outflow.

The following table shows the required dosage of ALBILEX^®-AKTIV-des:

Disinfection of piping-systems: The concentration of ALBILEX^®-AKTIV-des is measured by means of ALBILEX^®-H2O2-test-sticks (Art-No.: 190151).

Disinfection of surfaces: ALBILEX^®-AKTIV-des is diluted with water according to the above table. The disinfectant is applied to the surface of the tank with a low-pressure sprayer. After an exposure time of 12 hours rinse off disinfectant with fresh water and refill tank.

Ingredients

ALBILEX^®-AKTIV-des is a solution of hydrogen peroxide (<50 % H2O2), silver ions and peracetic acid (< 5 %).

Package Size & Item-No.

ALBILEX^®-AKTIV-des is supplied in following package sizes: