The disinfectant ALBILEX®-AKTIV-des is based on a mixture of hydrogen peroxide (<50 %), silver ions (~500 ppm) and peracetic acid (<5 %). ALBILEX®-AKTIV-des is specially designed for very severe microbiological contamination cases and is used for the disinfection of drinking-water piping systems, storage tanks and wells.
- Strong algicidal, bactericidal and fungicidal effects
- Strong effect against biofilms and pseudomonas aeruginosa
- One disinfectant for all kinds of pipe materials
- Simple to use and easy to dose in all common dosing-kits
- Long shelf-life (up to two years) due to decomposition and corrosion inhibitors
- Easy inactivation and disposal
Use in piping systems: ALBILEX®-AKTIV-des is directly injected to the water when filling the pipe section to be disinfected by means of a dosing-kit. The filling process under addition of ALBILEX®-AKTIV-des is to be continued until the measured hydrogen peroxide concentration is up to 500 ppm at the outflow.
The following table shows the required dosage of ALBILEX®-AKTIV-des:
|Application area||Dosing concentration of ALBILEX®-AKTIV-des||Exposure Time|
|Disinfection of piping-systems||1000 ppm (1000 ml ALBILEX-AKTIV-des per 1000 l water)||6-24 hrs|
|Disinfection of tank-surfaces||1 % (1 Ltr. ALBILEX-AKTIV-des per 100 l water)||12 hrs|
Disinfection of piping-systems: The concentration of ALBILEX®-AKTIV-des is measured by means of ALBILEX®-H2O2-test-sticks (Art-No.: 190151).
Disinfection of surfaces: ALBILEX®-AKTIV-des is diluted with water according to the above table. The disinfectant is applied to the surface of the tank with a low-pressure sprayer. After an exposure time of 12 hours rinse off disinfectant with fresh water and refill tank.
ALBILEX®-AKTIV-des is a solution of hydrogen peroxide (<50 % H2O2), silver ions and peracetic acid (< 5 %).
Package Size & Item-No.
ALBILEX®-AKTIV-des is supplied in following package sizes:
|Product||Quantity (kg)||Item-No.||Product Sheet||MSDS|